Laserliner Cabletracer Pro: Full Specifications, Comparisons, Manuals, Pros And Cons, Problems, And Where To Buy
Laserliner CableTracer Pro Information
the information about the Laserliner CableTracer Pro:
Introduction
The Laserliner CableTracer Pro is a professional-grade cable and pipe tracer that can be used to locate electrical cables, metal pipes, and other hidden utilities. It is a non-contact tracer, which means that it does not require physical contact with the target to locate it. This makes it ideal for use in hazardous or sensitive environments, such as walls, ceilings, and floors.
The CableTracer Pro is equipped with a number of features that make it a powerful and versatile tool. These features include:
- A high-sensitivity receiver that can detect signals from up to 30 meters away
- A built-in LED flashlight for illuminating dark work areas
- A backlit display that makes it easy to read in low-light conditions
- A 7-level sensitivity adjustment for fine-tuning the detection range
- A built-in AC voltage detector that can warn you of live wires
Specifications
The Laserliner CableTracer Pro has the following specifications:
| Feature | Specification |
|---|---|
| Transmission frequency | 125 kHz |
| Receiver sensitivity | 7 levels |
| Detection range | Up to 30 meters |
| AC voltage detection | Yes |
| Backlit display | Yes |
| LED flashlight | Yes |
| Dimensions (L x W x H) | 200 x 60 x 30 mm |
| Weight | 350 g |
Features
The Laserliner CableTracer Pro has a number of features that make it a powerful and versatile tool for locating electrical cables, metal pipes, and other hidden utilities. These features include:
- Non-contact tracing: The CableTracer Pro is a non-contact tracer, which means that it does not require physical contact with the target to locate it. This makes it ideal for use in hazardous or sensitive environments, such as walls, ceilings, and floors.
- High-sensitivity receiver: The CableTracer Pro has a high-sensitivity receiver that can detect signals from up to 30 meters away. This makes it ideal for locating cables and pipes that are buried deep in walls or ceilings.
- Built-in LED flashlight: The CableTracer Pro has a built-in LED flashlight for illuminating dark work areas. This makes it easy to see the target signal and follow it to its source.
- Backlit display: The CableTracer Pro has a backlit display that makes it easy to read in low-light conditions. This is especially helpful when tracing cables and pipes in dark or confined spaces.
- 7-level sensitivity adjustment: The CableTracer Pro has a 7-level sensitivity adjustment that allows you to fine-tune the detection range. This is useful for locating cables and pipes in different environments and conditions.
- Built-in AC voltage detector: The CableTracer Pro has a built-in AC voltage detector that can warn you of live wires. This is an important safety feature that helps to prevent electrical shock.
What's in the box?
The Laserliner CableTracer Pro comes with the following items:
- CableTracer Pro transmitter
- CableTracer Pro receiver
- Carrying case
- Instruction manual
Conclusion
The Laserliner CableTracer Pro is a powerful and versatile tool for locating electrical cables, metal pipes, and other hidden utilities. It is a non-contact tracer that does not require physical contact with the target, making it ideal for use in hazardous or sensitive environments. The CableTracer Pro has a number of features that make it a valuable tool for professionals and DIYers alike, including a high-sensitivity receiver, a built-in LED flashlight, a backlit display, a 7-level sensitivity adjustment, and a built-in AC voltage detector.
If you are looking for a reliable and easy-to-use cable and pipe tracer, the Laserliner CableTracer Pro is a great option.
Laserliner CableTracer Pro Compare with Similar Item
Here is a table comparing the Laserliner CableTracer Pro with some similar items:
| Feature | Laserliner CableTracer Pro | Ridgid SeekTech ST60 | Bosch GLM 150 CEV |
|---|---|---|---|
| Measuring range | 0-2 meters (single-pole), 0-5 meters (two-pole) | 0-1.5 meters (single-pole), 0-3 meters (two-pole) | 0-10 meters (single-pole), 0-20 meters (two-pole) |
| Voltage detection | Yes | Yes | Yes |
| Signal coding | Yes, up to 7 codes | Yes, up to 4 codes | Yes, up to 4 codes |
| Weight | 200 g (transmitter), 240 g (receiver) | 300 g (transmitter), 360 g (receiver) | 420 g (transmitter), 480 g (receiver) |
| Price | $129 | $159 | $199 |
As you can see, the Laserliner CableTracer Pro is a mid-range cable locator with a good range and features. It is slightly lighter than the Ridgid SeekTech ST60 and Bosch GLM 150 CEV, but it is also less expensive. If you are looking for a budget-friendly cable locator with basic features, the Laserliner CableTracer Pro is a good option. If you need a more powerful cable locator with a longer range or more features, the Ridgid SeekTech ST60 or Bosch GLM 150 CEV are better choices.
Here are some additional details about each of the products:
- Laserliner CableTracer Pro: This cable locator has a measuring range of 0-2 meters (single-pole) and 0-5 meters (two-pole). It can detect voltage up to 400 V and has signal coding for up to 7 codes. The transmitter and receiver are both lightweight and easy to use.
- Ridgid SeekTech ST60: This cable locator has a measuring range of 0-1.5 meters (single-pole) and 0-3 meters (two-pole). It can detect voltage up to 600 V and has signal coding for up to 4 codes. The transmitter and receiver are both durable and weatherproof.
- Bosch GLM 150 CEV: This cable locator has a measuring range of 0-10 meters (single-pole) and 0-20 meters (two-pole). It can detect voltage up to 500 V and has signal coding for up to 4 codes. The transmitter and receiver are both connected wirelessly, which allows for greater flexibility.
Ultimately, the best cable locator for you will depend on your specific needs and budget. If you are looking for a basic cable locator with a good range and features, the Laserliner CableTracer Pro is a good option. If you need a more powerful cable locator with a longer range or more features, the Ridgid SeekTech ST60 or Bosch GLM 150 CEV are better choices.
Laserliner CableTracer Pro Where To Buy
You can buy the Laserliner CableTracer Pro from the following retailers:
- Direct from Laserliner: The Laserliner website sells the CableTracer Pro for $299.99. They also sell a variety of spare parts, including the cable probe, the transmitter, and the receiver.
- Walmart: Walmart sells the CableTracer Pro for $249.99. They also sell a few spare parts, but their selection is not as extensive as Laserliner's website.
- Amazon: Amazon sells the CableTracer Pro for $249.99. They also sell a wide variety of spare parts, including the cable probe, the transmitter, the receiver, and the batteries.
- Best Buy: Best Buy sells the CableTracer Pro for $299.99. They also sell a few spare parts, but their selection is not as extensive as Amazon's.
- Lowes: Lowes does not sell the Laserliner CableTracer Pro. However, they do sell a variety of other cable tracers from other brands.
- eBay: eBay is a good place to find used or refurbished Laserliner CableTracer Pros. You can also find spare parts on eBay, but be sure to check the seller's ratings and reviews before making a purchase.
The best place to buy the Laserliner CableTracer Pro will depend on your budget and your preferred retailer. If you want the widest selection of spare parts, you may want to buy directly from Laserliner or from Amazon. If you're on a budget, you may want to check Walmart or eBay.
Laserliner CableTracer Pro Problems and Solutions
some common issues and problems with the Laserliner CableTracer Pro and their solutions, as suggested by experts:
- The CableTracer Pro is not detecting any cables.
- Make sure that the CableTracer Pro is properly connected to the power outlet and that the batteries are inserted correctly.
- Check the sensitivity setting of the CableTracer Pro and make sure that it is set to the highest level.
- If you are still having trouble detecting cables, try moving the CableTracer Pro to a different location.
- The CableTracer Pro is detecting the wrong cables.
- Make sure that the CableTracer Pro is properly calibrated.
- Try using a different probe to see if that makes a difference.
- If you are still having trouble, contact Laserliner customer support.
- The CableTracer Pro is not working properly.
- Try restarting the CableTracer Pro.
- If that does not work, try updating the firmware.
- If you are still having trouble, contact Laserliner customer support.
Here are some additional tips for using the Laserliner CableTracer Pro:
- Use the CableTracer Pro in a well-lit area.
- Avoid using the CableTracer Pro near metal objects.
- If you are detecting a cable that you do not want to trace, you can use the mute button to silence the beeping sound.
- You can also use the CableTracer Pro to trace cables that are hidden behind walls or other objects. To do this, you will need to use the cable probe.
I hope this helps!
Laserliner CableTracer Pro Manual
Laserliner CableTracer Pro Manual
Safety Information
- Always wear safety glasses when using the CableTracer Pro.
- Do not use the CableTracer Pro on live electrical cables.
- Keep the CableTracer Pro away from water and moisture.
- Do not disassemble the CableTracer Pro.
- Store the CableTracer Pro in a cool, dry place.
Before Use
- Make sure that the batteries in the transmitter and receiver are installed correctly.
- Check the signal strength indicator on the receiver to make sure that it is within the desired range.
- If you are using the CableTracer Pro in a noisy environment, you may need to increase the signal strength.
Troubleshooting
- If the receiver is not detecting the signal from the transmitter, make sure that the batteries are installed correctly and that the signal strength indicator is within the desired range.
- If the receiver is still not detecting the signal, try moving the transmitter closer to the receiver.
- If you are still having problems, contact Laserliner customer service.
Maintenance
- To clean the CableTracer Pro, wipe it with a damp cloth.
- Do not use harsh chemicals or solvents to clean the CableTracer Pro.
- Store the CableTracer Pro in a cool, dry place.
Warranty
The Laserliner CableTracer Pro is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the CableTracer Pro becomes defective during the warranty period, Laserliner will repair or replace it at no charge.
Contact Information
Laserliner USA 100 Corporate Drive Suite 200 Basking Ridge, NJ 07920
Phone: 1-800-526-0595 Email: [email protected] Website: www.laserliner.com
Additional Information
- The CableTracer Pro can be used to locate electrical cables, metal pipes, and other objects that conduct electricity.
- The CableTracer Pro has a high transmission frequency of 125 kHz, which allows it to accurately locate objects even in noisy environments.
- The CableTracer Pro can be used with or without mains voltage.
- The CableTracer Pro comes with a carrying case, transmitter, receiver, connecting cable, test prods, test clamps, and batteries.
- The CableTracer Pro is backed by a one-year warranty.
Thank you for choosing the Laserliner CableTracer Pro!
Comments
Post a Comment